Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: email@example.com
The stock availability for this product is limited at the moment. Please contact the sales team for more information at firstname.lastname@example.org.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at email@example.com. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : firstname.lastname@example.org
Plates are connected directly by knob screw to a vibration isolator, optical experiment system with M6 tap.
◦When post adapter plates are used, the optical axis will move 10mm upward. (12.3mm only for MHG-12.7BP.)
◦The adapters are designed for use with a mirror of 5mm thickness. Offset remains if a mirror of thickness other than 5mm is used.
◦Fixing method : Fix the plate to tap counterbored with M4 thread screw. Since tap counterbored is located two direction, fix the plate in easier direction for operation of adjustment screw.
◦Fixing method of MHG-BP to optical table:Fix plates to optical table with accessory M6 knob screw. Tighten up a screw from lock hole located on the side of the knob with hexagonal wrenc