Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: email@example.com
The stock availability for this product is limited at the moment. Please contact the sales team for more information at firstname.lastname@example.org.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at email@example.com. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : firstname.lastname@example.org
A new design based on the Kinematic mirror holders (MHG) resulting in reduced prices. These holders are best for experiments using many simple mirror holders or for use in production devices.
◦A small footprint offers more adjustment space compared to the MHG series.
◦Mirrors are held are at three points along the side to distribute the stress on the mirror evenly.
◦The thin frame and setscrew mounting method insure that large clear apertures can be obtained with reflected or transmitted light.
▶Threaded and counterbored mounting holes allow MHGT to be mounted on female threaded M4 posts or on male threaded M6 posts.
▶If lockable adjusters are required, see MHG-NL mirror holders.
▶The installation center of the post is offset from the mirror reflective surface. These holders cannot be used for installation on an optical bench at 45 degrees incidence. Please use the mirror holders without offset (MHI).
▶The rotation center of fine adjustment does not match the mirror reflective surface. For fine measurement, Please use gimbal mirror holders (MHAN) of which rotation center of fine adjustment matches the mirror reflective surface.