Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: email@example.com
The stock availability for this product is limited at the moment. Please contact the sales team for more information at firstname.lastname@example.org.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at email@example.com. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : firstname.lastname@example.org
This mirror holder is made by stainless steel and optimized for 12.7 mm dichroic mirrors and beamsplitters. Knob-less design is suitable for system integration.
◦ High-resolution adjustment with precision screw (P=0.10 mm)
◦ Through hole on the body for crossed beam configuration (can adopt 45 degrees rear reflection)
◦ Two symmetric models, L-type and R-type are available
◦ UV laser compatible
▶Posts Holders (PST) and Small Pedestal Base (SPS) is available for mounting on the breadboards.
▶1.5 mm Hex Wrench with Knob (KCL-1513) is available for tilt/rotation adjustment.
▶Since there is only one mounting direction, this product is not switchable between L-type and R-type.
▶This product is made of stainless steel and metallic lustrous. Contact our Sales epresentatives if you require a black surface finish.
▶When the mounted optic is thicker than 3 mm, rear reflection beam may be partially blocked.
|Primary material||Stainless steel|