SIGMAKOKI

Register


MHL
Compatible Optics Diameter
Compatible Optics Thickness
Adjustment Range Tilt
Adjustment Range /Rotation
Resolution Tilt
Resolution Rotation
Zoom

The MHL kinematic mirror holder incorporates a steel flexure spring for high rigidity and suppression of positional shifts due to shocks or vibrations.

◦Includes provisions for post mounting (M6 tapped hole with counterbore for M4 or 8-32 thread inserts).
◦Baseplates (MHL-BP) available for mounting directly to breadboards.
◦Mirror holder cell is removable and can be replaced by custom cells or adapters.
◦Setscrew locking mechanism for preventing accidental changes after adjusting mirror angle.

Related product
Products
Technical Data
Documents/Downloads
Guide

▶Manual adjustment screws can be replaced by motorized actuators. Please contact Sales Division for more information.
▶Remove mirror cell using four Philips head screws on front of mount. ◦Unscrew retaining ring and remove Resin washer. ◦Insert mirror with reflective surface facing the flange. ◦Tight against Resin washer. ◦Insert mirror cell into body and reattach using four Philips head screws.

Attention

▶MHL has different design from MHB. Please confirm the dimension by CAD drawings.
▶Posts and base plates are not included. Please purchase separately.
▶Depending on the angle of incidence, the beam will be shaded by the frame of mirror mount. For the usage of 45 degrees transmittance, Kinematic Mirror Holder (MHG) or Gimbal Beamsplitter Holders (BHAN) is available.
W4001, W4011
▶Rotation center of MHL doesn’t match the center of mirror surface. If the rotation center is needed to match the center of mirror surface, Vertical Control Gimbal Beamsplitter Holders (BSHL-2) or Gimballed Mirror Mounts (MHAN) are available.
W4012, W4010

Common Specifications
Primary materialAluminum
FinishBlack anodized
Outline Drawing
■MHL-25.4S

Zoom
■MHL-30S

Zoom
■MHL-50S

Zoom
■MHL-50.8S

Zoom
Mirror frame with locking mechanism

Zoom

Part Number

Catalog PDF

dxf

STP

IGS

SAT

MHL-25.4S

MHL-30S

MHL-50S

MHL-50.8S

Spec
Compare
Part Number
Add to cart Cart
    JP Yen Stock Qty
MHL-25.4S
MHL-30S
MHL-50S
MHL-50.8S

φ25mm, φ25.4mm

3 - 9mm

2 points

±2°

±2°

0.3°/Rotation

0.3°/Rotation

0.28kg

φ30mm

3 - 9mm

2 points

±2°

±2°

0.3°/Rotation

0.3°/Rotation

0.29kg

φ50mm

4 - 16mm

2 points

±3°

±3°

0.2°/Rotation

0.2°/Rotation

0.56kg

φ50.8mm

4 - 16mm

2 points

±3°

±3°

0.2°/Rotation

0.2°/Rotation

0.56kg

RoHS  

¥25,000

Assembly
parts available
RoHS  

¥25,000

Assembly
parts available
RoHS  

¥29,000

Assembly
parts available
RoHS  

¥29,000

Assembly
parts available