Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: email@example.com
The stock availability for this product is limited at the moment. Please contact the sales team for more information at firstname.lastname@example.org.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at email@example.com. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : firstname.lastname@example.org
Holders for micro lenses of φ3mm or less. Designed to hold small optics at the end of a long and thin arm to allow other optical elements to be placed close to the element being held. Typical uses include collimator lenses for fiber or laser diodes.
◦A light spring force holds the optic securely in place.
◦Optics can be mounted easily and securely by clamping an optic in the groove at the end of the arm.
◦The MLH-10ADP-2 is an adapter to mount the MLH-SF on a fiber holder (FOP), enabling adjustment of position and tilt.
◦The MLH-10ADP-2 can also mount on a □40mm XYZ stage (TSD-405L), enabling precision position adjustment of optics.
▶A tapped M6 screw hole on the end of the MLH-SF allows the holder to be directly mounted on a post.
▶Because there is no step on the arm, lens of thickness 2mm or higher can be fixed.
▶Because the tip of the arm has a V groove, rectangular optics can be mounted tilted. Either fix at a position away from the V groove, or fix with the optic glued to the flat plane on the top of the arm.
▶The MLH-10ADP-2 cannot be mounted on two-axis pinholes/objective holders (TAT) other than the FOP.
▶When the MLH-10ADP-2 is mounted on an FOP, it is necessary to remove the FOP adapter. Delivery of MLH-10ADP-2 and MLH-SF assembled on the FOP is available. Contact our International Sales Division for more information.