Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: email@example.com
The stock availability for this product is limited at the moment. Please contact the sales team for more information at firstname.lastname@example.org.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at email@example.com. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : firstname.lastname@example.org
Extremely thin beamsplitter. It can be inserted into an optical light path without any beam shift or chromatic dispersion for any light transmittance application.
◦We offer 2 choices of thickness, 300um and 90um.
◦Dielectric multi-layer optical coating with reflectance and transmittance ratios at 1:1.
◦Dielectric multi-layer optical coating on the front surface and AR coating on the rear surface to provide a mirror with no loss of power.
◦Due to the fabrication method, these offer good durability and high resistance against vibration making them an excellent alternative to traditional pellicle beamsplitters.
▶For customization, we can offer different sizes, wavelengths and deviation ratios.
Please contact our Sales Division with your requests.
▶Please refer to here for Wavelength Characteristic Data (Reference Data, EXCEL file format).
▶Thin beamsplitters are extremely thin and fragile. Special care must be taken during cleaning and handling.
▶When removing dust from the surface, do not use optics tissue paper to clean. Use a compress gas spray instead.
▶When applying a laser linear polarized light, the direction of polarization may affect the amount of reflectance and transmittance. For divergence usage of 1:1 ratio, ensure the direction of polarization is set to 45 degrees or use a circular polarizer.
▶The transmittance wavelength properties may be different if the incident angle is other than 45 degrees.
▶Avoid pushing the glass retainer as the mirror can bend or break. When handling, please use the other metal frame.
▶The surface reflectance accuracy may deteriorate when used outside recommended operating temperature.
▶The phase difference of incident light cannot be preserved on light transmittance and reflectance. Please use a wave plate to compensate.
|Material||Synthetic fused silica|
|Coating||Front surface ; Dielectric multilayer coating |
Rear surfaces (45 degrees taper hole) ; Antireflection coating
(Average P and S)
|50±5% (average with respect to wavelength.)|
|Divergence ratio |
(reflectance : transmittance)
|1 : 1|
|Surface Quality |
|Frame specification||Frame glass ; Synthetic fused silica |
Outer frame ; Aluminum
Finishing ; Black Anodized