Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: email@example.com
The stock availability for this product is limited at the moment. Please contact the sales team for more information at firstname.lastname@example.org.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at email@example.com. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : firstname.lastname@example.org
Holders used for securing and adjusting optical fibers with ferrules (fibers before connectors are attached). When used in combination with the adapter for fiber optics holders (OFH-ADP), these holders can hold φ0.3mm to φ4mm ferrules.
◦Focus adjustment knob enables collimation adjustment in combination with the lens.
◦The OFH-1 two-axis holder allows positioning of optical fibers.
◦The OFH-2 four-axis holder adds tip and tilt capability.
◦Both OFH-1 and OFH-2 are available with high precision differential adjusters for more demanding applications.
◦Custom sleeves (OFH-ADP) are available to hold ferrules from 0.3mm to 4.0mm diameters. Two setscrews in the body of the holder clamp the sleeve tight and hold the fiber and sleeve in place.
▶Fiber optics holders for FC connectors (FOP) and for SMA connectors (FOP-SMA) are also available.
▶Post length can be modified for an additional charge. Contact our Sales Division for more information.
▶For information regarding use with single mode fibers, contact our Sales Division.
▶OFH-ADP sleeves are made to order. Contact our Sales Division for delivery times.
▶To hold bare fibers without a ferrule, we recommend using the mini-fiber optics holders (MFH).
|Adjustment Range XY||±1.25mm|
|Front and Back Adjustment Range||±1.25mm|
|Coarse Resolution XY||0.5mm|