Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: firstname.lastname@example.org
The stock availability for this product is limited at the moment. Please contact the sales team for more information at email@example.com.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at firstname.lastname@example.org. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : email@example.com
We can provide special optical polishing service for optics or wedge substrate that achieve surface roughness of <0.2nm (Ra). These low scattering substrates are in high demand for high power laser and X-ray applications.
◦Use a wedged substrate for a beamsplitter to prevent effects of back reflection.
◦CaF2 (calcium fluoride) and MgF2(magnesium fluoride) are mainly used in UV and IR for its high transmittance.
◦Our highly technical processing yields low surface roughness (microscopic irregularities) and precision surface accuracy (flatness of whole surface).
▶Wedged substrates have marked with an arrow indicating the direction of front surface at the thickest thickness point.
▶The low scattering substrates are uncoated; the reflectance from the surface is 2.5% to 4%.
▶If using wedge substrate for transmission application, the beam will be deviate approximately 0.5 degrees.
▶The CaF2 substrate surface can be easily scratched. Do not use contact cleaning, please use air-blow for dirt cleaning.
▶The CaF2 and the MgF2 substrates get rough under high temperature and high humidity environment. Stock them in dry optical cabinet after use.
|Material||Synthetic fused silica , CaF2 windows for Ultraviolet |
|Clear aperture||90% of the diameter|