Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: firstname.lastname@example.org
The stock availability for this product is limited at the moment. Please contact the sales team for more information at email@example.com.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at firstname.lastname@example.org. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : email@example.com
Pellin Broca prism is a dispersing Brewster prism and is designed to emit in the direction of perpendicular to the incident beam. When the incident beam from a YAG laser is at Brewster angle it is possible to separate the second harmonic generation beam (532nm) and the fundamental harmonic generation beam (1064nm).
◦The Pellin Broca prism is using Brewster angle and the critical angle to reduce reflection losses and obtain high transmittance.
◦There is no coating on the surface of the Pellin Broca prism so it can be used with high energy pulsed laser.
◦This prism is used at the (Brewster angle) angle of light intensity of the beam of light (invisible) of the YAG fundamental harmonic generation and second harmonic generation beam to minimize reflection by the prism incident surface.
◦Make sure to use polarization direction of laser beam parallel to the bottom surface of the prism.
◦It can also be used for multi-wavelength oscillation laser spectroscopy of an Argon laser.
▶We can provide Pellin broca prisms custom to the wavelength of your laser upon request.
▶Other sizes are available, please contact our Sales Division with your request.
▶Because it deviates from the Brewster angle, the beam emitted from the ultraviolet wavelength is not a non-reflective.
▶Although it can also be used as a dispersing prism of non-polarized light, and not allowed to enter in the Brewster angle, it is not emitted at right angles to the incident angle.
▶It can also be dispersed incident S polarized laser beam, reflection loss occurs in the incident surface and the exit surface.
▶Fingerprints and dirt adhering to the uncoated surface will effect of the total reflection. Please use without touching anything on the uncoated surface.
▶A and B dimension is slightly shorter than the actual catalog because it contains chamfer dimension. Dimensional tolerances are defined at the intersection of each side that does not include a chamfer.
|Material||Synthetic fused silica|
|Design wavelength||706nm (Midway between 532nm to 1063nm)|
|Surface flatness of substrate||λ/10|
|Surface Quality |
|Clear aperture||Ellipse inscribed in a rectangular of 90% of the dimensions|