Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: firstname.lastname@example.org
The stock availability for this product is limited at the moment. Please contact the sales team for more information at email@example.com.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at firstname.lastname@example.org. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : email@example.com
Plate polarizing beamsplitters are a plate that is coated with a polarizing coating.
◦Plate polarizing beamsplitters transmit p-polarization and reflect s-polarization as the monochromatic beam entering is at Brewster’s angle.
◦The losses of input beam of these products are minimized because of no absorption of dielectric coating.
◦Coating characteristic are not influenced marginally by temperature change.
▶Please contact our Sales Division for customized products. (Customized on size, wavelength, extinction ratio etc.)
▶If the surface accuracy is required after coating, please contact our Sales Division.
▶Please refer to here for Wavelength Characteristic Data (Reference Data, EXCEL file format).
▶The surface flatness is the reflected wavefront distortion of the surface before coating.
▶Be sure to wear laser safety goggles when checking optical path and adjusting optical axis.
▶Rear surface has no coating.
|Material||Synthetic fused silica|
|Extinction ratio of transmission||Ts：Tp＝1：200|
|Coating||Front surface ; Dielectric multilayer coating |
Rear surfaces ; Uncoated
|Surface Quality (Scratch-Dig)||10−5|
|Clear aperture||90% of the diameter|