Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: email@example.com
The stock availability for this product is limited at the moment. Please contact the sales team for more information at firstname.lastname@example.org.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at email@example.com. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : firstname.lastname@example.org
Broadband Polarizing Beamsplitters provides wide band polarizing. Polarizing beamsplitters consist of two right angle prisms. One of them is coated with dielectric multi-layer polarizing coating on the hypotenuse face.
◦Polarizing beamsplitters split the light entering at zero degrees into p-polarization as transmitted and s-polarization as reflected.
◦Four surfaces of the cube are coated with multi-layer anti-reflection coatings.
◦For cube beamsplitters, unlike plate beamsplitters, beam deviations of transmitted beams and ghosts rarely occur.
▶Please contact our Sales Division for customized products. (Customized on size, wavelength etc.)
▶There is also a high extinction ratio Glan-Thompson prism (GTPB/ GTPC).
▶Please refer to here for Wavelength Characteristic Data (Reference Data, EXCEL file format).
▶Input beam from the prism on the side indicated by ○. When the light is incident from the side of the prism without mark, there is a possibility that the characteristics of the transmittance and extinction ratio will change.
▶The surface flatness is the reflected wave front distortion of the surface before coating.
▶Be sure to wear laser safety goggles when checking optical path and adjusting optical axis.
|Material||BK7 , SK2 , SF15 , Synthetic fused silica|
|Surface flatness of substrate||λ/4|
|Angular deviation of transmitted beam||＜10′|
|Coating||Hypotenuse surface ; Dielectric multilayer coating |
Four surfaces ; Multilayer antireflection coating
|Laser Damage Threshold||0.3J/cm2 (Laser pulse width ; 10ns , Repetition frequency ; 20Hz)|
|Surface Quality (Scratch-Dig)||20-10|
|Clear aperture||Circle that inscribed in a square of 85% of the dimensions|