Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: firstname.lastname@example.org
The stock availability for this product is limited at the moment. Please contact the sales team for more information at email@example.com.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at firstname.lastname@example.org. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : email@example.com
A transimpedance amplifier that converts weak photodiode output current to voltage.
Highly sensitive and supports external operation with PC.
◦Six conversion ranges 105 − 1010 (V/A) and extremely large conversion ratio, enabling detection of weak light.
◦Operated from the front panel as well as by PC (RS232C interface). Excellent compatibility with measurement control software such as SGADVAVCEE.
◦Temperature control photodiode (PDA-PD-1 as option), achieving stable detection of weak light.
◦PDA-PD-1 has built-in Peltier cooler, amplifier, temperature control circuit, and photo detector.
◦Peltier cooling module maintains low temperature.
◦Absorptive ND filters can be used and mounted to adjust the volume of exposed light.
◦0.5 meter length cable used.
◦Ultra low noise.
▶C mount type of Temperature controlled Photodiode (PDA-PD-1) is available separately. Contact our International Sales Division for more information
|Operation Temperature||0℃− 40℃ (Except sensor)|
|Amplifier Gain/Range 0||105V/A|
|Amplifier Gain/Range 1||106V/A|
|Amplifier Gain/Range 2||107V/A|
|Amplifier Gain/Range 3||108V/A|
|Amplifier Gain/Range 4||109V/A|
|Amplifier Gain/Range 5||1010V/A|
|MAX analog output voltage Load 2kΩ||4V|
|Measurement Gain Error (@Range 0 − 3)||2% vs. max light received in range|
|Measurement Gain Error (@Range 4)||3% vs. max light received in range|
|Measurement Gain Error (@Range 5)||4% vs. max light received in range|
|Cutoff Frequency (@Range 1)||3kHz|
|Cutoff Frequency (@Range 3)||30Hz|
|Cutoff Frequency (@Range 5)||0.3Hz|
|A/D Converter Conversion Frequency||16Hz|
|A/D Converter Resolution||24bits (but effective resolution is 16bits)|
|Temperature Control Temperature||−10℃ (Special photodiode)|
|Temperature Control Fluctuation Temperature||0.1℃ (Special photodiode)|
|Peltier Output Current||1A (Special Photodiode)|