Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: firstname.lastname@example.org
The stock availability for this product is limited at the moment. Please contact the sales team for more information at email@example.com.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at firstname.lastname@example.org. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : email@example.com
▶Compatible with the measurement and control software SGTERME (W9059) and SGEMCSE (W9060).
▶Sample programs are available for download on the website.
◦SG Sample (Ver.1.0.3) for 32/64 bit Windows®(RS232C)
◦SGCommander 32-bit version for Windows® (only for RS232C)
◦SGCommander 32/64-bit version for Windows® (only for RS232C)
▶Power requirement of the PKA-ID-02 is DC24V 1.8A. You need to purchase the AC-ADP-2427 or PAT-001-POW1 (AC adapter) or prepare your own power supply separately.
■■List of Commands
|Absolute coordinate pulse set command||A:Specifies the absolute coordinate value.|
|Absolute travel pulse set command||M:Specifies the absolute travel.|
|Drive command||G:Starts driving.|
|Theoretical origin return command||N:Returns to the theoretical origin.|
|Stop command||L:Stops travel.|
|Theoretical origin setting command||R:Resets the coordinate value.|
|Status check comm||Q:Returns the status of coordinate value, etc.|
|Status check command 2||！:Returns B (Busy) or R (Ready).|
|Internal information check command||？:Returns the internal information.|
|Speed setting command||S:Sets the pulse per step when the SPDSEL switch is set to LOW.|