Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: email@example.com
The stock availability for this product is limited at the moment. Please contact the sales team for more information at firstname.lastname@example.org.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at email@example.com. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : firstname.lastname@example.org
Right angle prism which are not coated can be used in various applications, such as total internal reflection critical angle and wavelength dispersion. In addition, various coatings are available to produce a prism optical element at a specific wavelength(s) to meet the application needs of customers.
◦The prisms are available made with synthetic quartz for use in the ultraviolet wavelength range and BK7 that can be used for visible to infrared range.
◦With very high accuracy and precision angles of the prism surface, it can also be used directly bonded to machined parts.
◦With many mounting methods right angle prisms are very useful as a substitute for a small mirror.
▶Contact our Sales Division with your request for custom prisms not listed on our website or in the catalog.
▶Production of high-precision prism and high angle accuracy are also available.
▶A dimension measured is slightly shorter than the catalog size because it contains chamfer dimension. Dimensional tolerances are defined by the sides of the triangle with the slope and two bottom surface.
▶Surface reflectance of the critical angle is nearly 100% reflection. However, the reflectivity of the surface that emits or incident on the glass has a loss of about 8 percent.
▶Most of the light through the prism side, if the light is incident on the slopes from the air it will not be reflected only partially.
▶In BK7, when the incident light at an angle of 41 degrees or less (less than the critical angle) from the side of the glass, it will not be a total reflection on the part of the light is transmitted through the air for the slope in BK7. In synthetic fused silica at an angle of incidence of 43 degrees or less (less than the critical angle) will not be a total internal reflection.
▶ Sometimes when dirt or fingerprints on the surface with no coating, total reflection will not happen anymore at the critical angle. Do not contact anything on the no coated surface.
|Material||BK7 (Refractive index nd＝1.517) |
Synthetic fused silica (Refractive index nd＝1.458
|Surface flatness of substrate||λ/4|
|Angle tolerance||±1′ (90°or 45°)|
|Surface Quality |
|Clear aperture||Circle or ellipse that inscribed in a rectangular of 90% of the dimensions|