Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: email@example.com
The stock availability for this product is limited at the moment. Please contact the sales team for more information at firstname.lastname@example.org.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at email@example.com. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : firstname.lastname@example.org
An economic general use achromatic lens suitable for an optical system, which does not require high surface quality imaging such as a microscope lens or telescope lens.
◦Specification except surface quality is almost the same as DLB series. Except when used in high-precision experiment using a laser, this lens is recommended.
◦It is optimized so that focal length gap is small in the visible light range and the aberration is minimized.
▶Achromatic lens is used when focusing an image at infinity or when making the point light source to collimated light. It does not provide sufficient optical performance when used in such as short-range imaging.
▶There is a direction of the incident parallel light with achromatic lens. The radius of curvature is allowed to be incident parallel light from the side of (the surface indicated by arrows) small curvature surface. If the parallel light incidents from the opposite side, then spherical aberration and chromatic aberration occur and the focused spot size will be large.
|Design wavelength||Blue: 486.1nm, Green: 546.1nm, Red: 656.3nm|
|Coating||Antireflection Coating for the Visible|
|Cement||Ultraviolet Hardened Adhesive|
|Surface Quality (Scratch-Dig)||60-40|
|Clear aperture||90% of the diameter|
|Laser Damage Threshold||0.3J/cm2 |
(Laser pulse width 10ns, repetition frequency 20Hz)