Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: firstname.lastname@example.org
The stock availability for this product is limited at the moment. Please contact the sales team for more information at email@example.com.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at firstname.lastname@example.org. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : email@example.com
Divides sharply the color of wavelength by reflecting the short wavelength and transmitting the long wavelength. Suitable for use in Bio-imaging and flow cytometry applications.
◦The short wavelength has high reflectance, fits perfectly for use in excitation light and fluorescence imaging.
◦The feature of the structure of this mirror is to maintain the distance of the edges of the P polarization and the S polarization to be close to each other. It narrows the gap of the reflective range and the transmission range to provide a steep rise.
◦There is limited absorption due to the dielectric coating.
▶Use the SDM mirror with interference filter as a pair for Bio-imaging applications.
▶For specific mirror holder, please contact our Sales Division.
▶Different size, wavelength and deviation ratio not mentioned on-line or in our catalog are available as custom products upon on request.
▶For aluminum mirror, dielectric mirror, TIRF Mirror (Total Internal Reflectance Fluorescence), please contact our Sales Division with your request.
▶Please refer to here for Wavelength Characteristic Data (Reference Data, EXCEL file format).
▶The transmittance characteristic of the mirror is a combination of the coating values of both sides of the mirror.
▶Use the mirror other than at 45 degrees angle of incidence, the transmittance and the reflectance characteristics may be different than specified.
▶The right reflecting surface appears when you see the notch on the upper right side of the mirror.
|Material||Synthetic fused silica|
|Surface flatness of substrate |
|5λ (Optical flat)|
|Polarization condition |
of incident beam
|unpolarized beam |
(or linear polarization of 45°azimuth , circular polarization)
|Surface Quality (Scratch-Dig)||40-20|