Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: firstname.lastname@example.org
The stock availability for this product is limited at the moment. Please contact the sales team for more information at email@example.com.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at firstname.lastname@example.org. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : email@example.com
Three types of interface are available to suit your application.
Analog (Bayonet Connector)
Best suited for installation in devices because the cable length between the camera and a monitor can be long.
By installing the viewer software that comes with the camera in a PC, it is easy to save images. It is provided either 2 million pixels and 5 million pixels according to the required resolution.
The camera can be directly connected to a high-definition compatible monitor. Best suited for visual inspection which requires high resolution and high frame rate.
Using the remote control unit that comes with the camera, you can display a cross line or shadow mask at any position on the screen, or make adjustments such as brightness (gain) or contrast while looking at the display on the screen.
◦Various C mount compatible microscopes are available.
Microscope systems (W2047), Zoom microscopes (W2007), OUCI-2 (W2012)
▶Analog (Bayonet Connector)
◦Connecting cables and conversion plugs are available. (W2017-7)
◦STC-MCA5MUSB3 comes with a C mount conversion adapter so that it can be used with CS mount microscopes in addition to C mount microscopes.
・The accessory cables for connecting between the camera and the monitor are available. (W2043-2)
▶The resolution of the monitor display may not increase depending on the resolution of the microscope or observation system. Please make sure that the resolution of the microscope or observation system is smaller than the camera cell size.
▶The cameras except for STC-MCA5MUSB3 are C mount cameras. They cannot be used with CS mount products (microscopes and lenses).
▶SK-N63CJ-C, SK-620BJ2 and SK-HD133DV come with an AC adapter. Please do not use AC adapters other than the one which comes with the product.
▶To record images from SK-N63CJ-C, SK-620BJ2 and SK-HD-133DV, equipment which can record analog signals and HDMI signals is required.
▶STC-MCA5MUSB3 does not come with a cable for connecting with a monitor. Please prepare these by the customer. Please purchase USB3.0 cables together. (W2043-2)
▶STC-MCA5MUSB3 cannot be fixed to a tripod or rod directly. Please use a mount for camera (STC-TP-HCA). (W2043-2)