Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: firstname.lastname@example.org
The stock availability for this product is limited at the moment. Please contact the sales team for more information at email@example.com.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at firstname.lastname@example.org. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : email@example.com
Symmetrical biconvex lenses are most useful when dealing with finite conjugate points. This makes them ideal for 1:1 imaging applications or for use in multi-element systems.
◦There are two types of biconvex lenses available; synthetic fused silica for wavelengths less than 350nm ultraviolet light.
◦Our lenses are listed by outside diameter and focal length to assist your selection according to required specifications.
▶Lenses are available in a large selection and in custom sizes and focal lengths.
▶In addition to our standard coating we offer custom anti-reflective coating at specific wavelengths.
▶Achromatic lenses (DLB) which are chromatic aberration correction are also available.
▶Please refer to here for Wavelength Characteristic Data (Reference Data, EXCEL file format).
▶The biconvex spherical lens has a chromatic aberration, and the focal length will vary depending on the wavelength.Please check the “wavelength characteristic of the focal length data” on “Technical Data” for the focal lengths of each wavelength.
▶Biconvex spherical aberration is larger than that of the plano-convex lens, so focal spot may not gather at one point.
▶Transmissions losses due to reflection off the front and rear surfaces of the lens can be minimized by coating the surfaces. Consult our Sales Division for anti-reflection coatings suitable for your application.
|Material||Synthetic fused silica|
|Refractive index ne||1.46|
|Clear aperture||90% of the diameter|
|Surface Quality (Scratch-Dig)||φD≧φ10mm ; 20－10 |
φD＜φ10mm ; 40－20