Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: firstname.lastname@example.org
The stock availability for this product is limited at the moment. Please contact the sales team for more information at email@example.com.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at firstname.lastname@example.org. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : email@example.com
Zinc selenide (ZnSe) meniscus Lens (ZnSe) is used as a condensing lens with CO2 laser (10.6μm). The meniscus designed shape is optimized to minimize spherical aberration.
◦With anti-reflection coating the loss due to surface reflection can be reduced, and the laser light with high efficiency can be condensed.
◦ZnSe crystal has little hygroscopic, it can be handled in the same way as a normal optical element.
◦Since ZnSe crystal is a isotropic crystal, it does not have birefringence (polarization characteristics).
Important： Treatment of ZnSe optics
ZnSe (Zinc selenide) is Poisonous and harmful substance classified as legal, depending on the specifications, the certificate of delivery may be required for acquisition of Poisonous and harmful substances. In addition, ZnSe Optics disposal after use is prohibited in general.
Lenses that are no longer needed, please return it to us.
However, we only take back products that we supplied. This policy noted is in Japan and other countries may differ in the treatment of ZnSe (Zinc selenide), please contact your local sales office.
▶When the high power laser beam is condensed on the surface of ZnSe, due to the thermal decomposition, toxic gas may occur. In addition, a large amount of gas and powder occur when the ZnSe lens is damaged by the laser thermal run-away. If the ZnSe lens is damaged, DO NOT touch the lens by bare hands. Please collect the debris and be careful not to inhale the powder and gas steam generated.
▶Since meniscus lens is a single lens, the focal length will be changed depending on the wavelength.
▶There is a direction to put a light in the Plano convex lens. Please make sure to put the parallel light from the convex side. If it is reserved, the spherical aberration increases, the focused spot becomes large and the image looks blurred.
|Coating||Antireflection coating (Wavelength 10.6μm)|
(Diameter of φ25.4mm is wavelength of 650nm and 10.6μm)
|Clear aperture||90% of the diameter|
|Surface Quality (Scratch-Dig)||20−10|