Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: email@example.com
The stock availability for this product is limited at the moment. Please contact the sales team for more information at firstname.lastname@example.org.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at email@example.com. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : firstname.lastname@example.org
▶Please contact our Sales Division for customized products.
▶Holders to mount the mirrors are available , please contact our Sales Division to assist your selection.
▶Please refer to here for Wavelength Characteristic Data (Reference Data, EXCEL file format).
▶The mirrors are supplied with a protective film attached to the coated surface. Before use, please remove the protective film.
▶When a laser light is transmitted with multiple mirrors installed there will be a large amount of light loss due to the absorption of the aluminum coating. Please consider using dielectric multi-layer mirrors (TFM) for improved performance.
|Material||Float glass (Soda-Lime glass)|
|Coating||Aluminum+Dielectric multilayer coating|
|Clear aperture||90% of the diameter|
|Rear surface||Glossy surface|
|Surface Quality (Scratch-Dig)||60-40|