Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: email@example.com
The stock availability for this product is limited at the moment. Please contact the sales team for more information at firstname.lastname@example.org.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at email@example.com. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : firstname.lastname@example.org
The Fabry-Perot type resonator cavity is often used for measuring extremely high accuracy time or distance with use of the light. Super mirror is a ultra-high performance mirror that surface reflectance is close to 1 (100%) as much as possible in order to increase the performance of the resonator.
◦By using an ion beam sputtering (IBS), high quality and dense coating with few defects has been coated.
◦With a special polishing technique, the low-scattering substrate of surface flatness Ra<0.1nm is used.
◦The mirror coating with reflectivity of 99.999% is achieved from the coating design technology that had been developed for many years.
◦Scattering loss due to the substrate and the coating is very small, when it is incorporated into a cavity, it is to be expected a high finesse and very narrow spectral bandwidth.
◦It is provided two types of wavelength 532nm and 1064nm.
▶The super mirror coated on a concave substrate is available as custom. Please specify the radius of curvature.
▶For products with different wavelengths, sizes, and incident angles not listed on-line or in our catalog, contact our Sales Division with your request.
▶Please refer to here for "Wavelength Characteristic Data (Reference Data, Transmittance: T[%]) " for each wavelength.
▶When used as a single mirror, it does not transmit the light because the reflectance is high. Please use it after assembled to precise cavity in order to use transmitted light.
▶Please make a measurement or handling of the mirror in the clean environment. The dirt, dust and gas contamination will cause a significant effect on the measured value.
▶If a cavity is consisted of two plane mirrors, the output light may become unstable. In order to realize the stable cavity, please change the mirror of one side or both into a concave mirror, and build a cavity.
▶The Super Mirror has an extremely long lead time manufacture and test resulting in longer delivery than simple products on-line and in our general catalog. Please consult our Sales Team in advance when ordering.
|Material||Synthetic Fused Silica|
|Coating||Front Surface: Dielectric Multi-layer High-Reflection Coating|
Rear Surface: Dielectric Multi-layer Anti-Reflection Coating
|Surface Quality (Scratch-Dig)||10−5|
|Clear Aperture||80% of the diameter|
|Reflectance of rear surface||＜0.15%|
|Shape Type||Optical Flat|