Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: firstname.lastname@example.org
The stock availability for this product is limited at the moment. Please contact the sales team for more information at email@example.com.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at firstname.lastname@example.org. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : email@example.com
These laser mirrors are designed for specific wavelength laser applications where low wavefront distortion, low scattering and high reflectivity are usually important. These narrowband reflectors are for several wavelengths and sizes.
◦Dielectric multi-layer coating does not have absorption like Aluminum coatings and provide higher than 99% reflectance except some mirrors for UV wavelength use are provide 95% reflectance.
◦These coatings are much harder and provide higher laser damage threshold than Al+MgF2 coating.
▶Please consult our Sales Division for assistance in your selection and for customized products. (customized on outer diameter, wavelength characteristic, etc.) Please use the inquiry sheet.
▶Also available are our surface flatness guarantee (HTFM) mirrors with accuracy guarantee after surface coating.
▶Please refer to here for Wavelength Characteristic Data (Reference Data, EXCEL file format).
▶The un-coated rear surface of the mirror is polished and the arrow on the side of the substrate points towards the coated surface.
▶Reflectance values of laser line mirrors are different according to the polarization of input beams. S-Polarization has high reflectance with a wide reflective bandwidth when compared to P-Polarization. The reflectance specification listed is at random polarization or (P-Polarization reflectance + S-Polarization reflectance) / 2.
▶The reflectance curves are based on actual measurements and may be vary by production lots.
▶Be sure to wear laser safety goggles when checking optical path and adjusting optical axis.
▶The surface flatness is the reflected surface wavefront distortion before coating.
|Material||BK7 (TFM-157 ; CaF2)|
|Coating||Dielectric multi-layer coating|
|Surface flatness||λ/10 (TFM-157 ; Polished)|
|Surface Quality (Scratch-Dig)||10−5 (TFM-157 ; 40−20)|
|Clear aperture||90% of the diameter|