Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: email@example.com
The stock availability for this product is limited at the moment. Please contact the sales team for more information at firstname.lastname@example.org.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at email@example.com. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : firstname.lastname@example.org
Fixtures used for optical axis adjustment of non-visible lasers. Insert IR sensor cards or van paper in the path using the spring clips, rotate cross wires into the laser light to confirm the positional relationship of the shadow of beam and cross wire.
◦The cross wires are retractable and are placed in the center of posts to enable good repeatability.
◦If two target holders are placed leaving an interval, they can be used as a laser beam tilt adjustment jig.
▶Iris diaphragm (IH) convenient for visible light lasers is also available.
▶Use IR sensor cards with large light receiving surface. Card type IR/UV sensors (SIRC-1 or SUVC-1) cannot be used.