Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: email@example.com
The stock availability for this product is limited at the moment. Please contact the sales team for more information at firstname.lastname@example.org.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at email@example.com. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : firstname.lastname@example.org
An active vibration isolator counterbalances vibrations by giving instantaneous reverse phase vibrations versus generated vibrations and is suitable for vibration isolation in 0.7 − 100Hz 3 dimensional space. It also displays high vibration isolation performance even for natural frequencies in the 1 − 2Hz low frequency range for air spring type vibration isolators.
◦After installing the instrument, it performs the first leveling automatically. Thus, it can be used to maintain the horizontal state of instrument with an offset load.
◦Unlike the air spring type that is prone to cause hunting when used for instruments with a high center of gravity, it uses a coil spring making it suitable to use for instruments with a high center of gravity.
■TS-140 (TP25)/TS-150 (TP25)
◦Vibration isolation status in the vertical and horizontal directions can be checked by connecting your oscilloscope to this product from the BNC connector in the back of the unit.
■TS-300LT (TP25)/TS-300 (TP25)
◦Vibration isolation status in the vertical and horizontal Outline Drawing directions can be checked on the front menu display.
▶Active vibration isolation can be turned ON or OFF with the external remote switch (optional).
▶If the oscillation is too large due to insufficient stiffness of the installation site, its vibration isolation performance might deteriorate or vibration isolation might be not possible. To prevent this situation, a special table frame with high rigidity is available.
▶High Damping High Rigidity Special Table Frame (H-L-TS) (W6006)
▶This product is manufactured by The Table Stable, Ltd. of Switzerland and sold for use only in the Asia Region (excluding India and Australia).
▶Because of the weight, delivery cost will be quoted separately. (W6001)
|System Configuration||Controller and vibration isolator unit integrated type|
|Active Control Range||about 0.7Hz − 100Hz|
|Adjustment for Operational Environment||Gain and offset are automatically adjusted|
|Initial Horizontal Adjustment||Automatic adjustment|
|Lock when Moving||Automatic locking mechanism|
|Confirmation of Vibration Isolation Status||Display on the unit front monitor|
(For vibration detection status for 8 axes, connect to external devices from the BNC connector on the back.)
|Power Supply Voltage|
|Power Consumption||Normal 10W, Max 20W (70VA)|
|Ambient Temperature Range||5°C − 40°C|
|Ambient Humidity Range||10 − 90% (5 − 30°C), 10 − 60% (30 − 40°C)|
|Ambient Altitude||Up to 2,000m|
|Mounting Plate Used||Part number suffix: None Aluminum plate, white alumite finish (non magnetic)|
Part number suffix: TP25 Magnetic stainless steel plate, unpainted, M6 tapped holes on 25×25mm matrix over the entire surface (effective depth 6mm)