Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: email@example.com
The stock availability for this product is limited at the moment. Please contact the sales team for more information at firstname.lastname@example.org.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at email@example.com. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : firstname.lastname@example.org
Horizontal (Flat) Z axis steel translation stages. In-line micrometer utilizes an internal pivot mechanism to enable vertical translation.
High stiffness due to steel extended contact bearing ways. Black chrome finish.
Z‐Axis Steel Extended Contact Translation Stages (TSD-603) series is now available for low‐profile type. It became low‐profile while maintaining the same load capacity as TSD-603, and usability was improved by locating micrometer head and locking clamp on the same side.
▶Vacuum-compatible stainless steel stages (TSDS) are also available. (W7043)
▶The part number suffix FP indicates products with fine-pitch screws instead of standard micrometers.
▶Fine Pitch screws have a screw pitch of 0.25mm and require a hex wrench or the optional hex wrench with knob (KCL) for adjustment.(W8008-3)
▶This translation stage type is not suitable for inverted use. In this condition, all load would be pulling against the spring.
▶Regarding 25 × 25mm and 40 × 40mm size stages, please do not apply heavy load toward the rotating (‘yawing’) direction, as it may damage the stage.
▶These stages use a pivot mechanism to transfer horizontal motion to vertical motion. This mechanism induces a small non-linearity between the distance the micrometer moves and the distance the stage platform moves. Contact our Sales Division for more information.