Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: email@example.com
The stock availability for this product is limited at the moment. Please contact the sales team for more information at firstname.lastname@example.org.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at email@example.com. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : firstname.lastname@example.org
Look for a low cost polarization solution, USP is for you. Usage in Photo-elasticity experiments and simple polarization experiment or light intensity adjustment in illumination application.
◦Possible to use 2 plastic polarizer for various experiments.
◦Place 2 polarizers onto the light axis by changing the polarization of each polarizer, it allows you to experience the light intensity adjustment across a wide dynamic range.
◦The plastic polarizer is thin and convenient for confined experiments space.
◦Since product is made of plastic there is no risk of damage when dropped.
▶For product sizes that is not listed on-line or in our catalog, please contact our Sales Division.
▶Because the product is made of plastic, it is easy to cut and provide the product in any form.
▶For high extinction ratio products, we suggest our polarizer filet (SPF) or the Glan Thompson prism (GTPC).
▶We suggest using our filter holder (FHS) for mounting your polarizer.
▶The polarizer light axis direction is not indicated, please see our application note to find out how to identify the correct direction.
▶Do not use this plastic filter with high power laser applications.
▶Do not use solvents other than alcohol to wipe the polarizer.
▶Do not use paper to wipe the polarizer, you may scratch the surface and may not be efficient for your experiment due to scattering and diffraction problem. Please use polarizer filter (SPF) it this is a concern.
▶The extinction ratio may be changed according to the wavelength.
|Material||Polarizing high-polymer film laminated between plastic sheets|
|Wavelength Range||400 - 700nm|