Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: firstname.lastname@example.org
The stock availability for this product is limited at the moment. Please contact the sales team for more information at email@example.com.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at firstname.lastname@example.org. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : email@example.com
VPF band pass filter with effective diameter at 45mm square. Fit for experimentation that needs large collimated light incident on sample or on a large diverges light which requires a larger size band pass filter.
◦The filters are made of dielectric multilayer coating and metallic coating which assure a steep rise and a sharp cut-off spectrum.
◦A selection of filter from the spectrum half-width from 10nm to 12nm, the center spectrum from 400nm to 900nm with 10nm increments.
◦The whole lateral side of the filter is painted in black to avoid scattered light effects.
▶For filter size of diameter 25mm, please see VPF-25C or see the high transmittance filter interference filter (YIF).
▶For custom sizes or form which are not mentioned on-line or in this catalog or for any specific holder for this filter, please contact our Sales Division.
▶Please refer to here for "Wavelength Characteristic Data (Reference Data, Transmittance: T[%]) " for each wavelength. For the models that are not in the form, please contact our Sales Division.
▶Heatproof temperature at 80°C (Celsius) as maximum, please avoid using it with higher temperature light-source.
▶The filters are heat absorptive, therefore they are not fit to use with high power laser and high energy pulsed laser.
▶The filters characteristic depends on the angle of incident. If the angle of the light axis inclines, the center wavelength shifts to shorter wavelength side and the transmittance may decrease. More the selected spectrum width is precise more the inclination tolerance is small. Make sure that the incident angle is set at 0 degrees for an efficient experiment.
▶The filters usage temperature of environment is set at 23℃ (Celsius), more the temperature is high more the center wavelength shifts to the longer wavelength side.
▶Therefore a high precision set up is required for obtaining an efficient experiment each filter thickness is different.
|Blocking range||0.01% (1 - 1200nm)|
|Coating||Dielectric multi-layer coating, Metal coating|