Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: firstname.lastname@example.org
The stock availability for this product is limited at the moment. Please contact the sales team for more information at email@example.com.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at firstname.lastname@example.org. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : email@example.com
This filter can extract light in a specific wavelength range. Very high transmittance can be obtained in the transmission range. Outside the specified transmission wavelength range the transmission decrease is steep and light is not transmitted almost close to the transmission range.
◦Since the coating is a dielectric multilayer the absorption is small and transmittance is high. It enables the separation of the wavelength specified light efficiently.
◦The filters are metallically framed which make it easy to be mounted into a holder.
◦Large choice of spectrum, range from UV 325nm to IR 1064nm are available.
▶Please contact our Sales Division for customized products. (customized outer diameter, wavelength characteristic, etc.)
▶We also offer interference filters VPF with cutting range that is broad.
▶Characteristics of the interference filter is depending on the incident angle. If it is tilted from the optical axis, then the center transmitting wavelength is shifted toward the short wavelength, and transmittance also decreases. Please make sure to incident at 0 degrees collimated light or close to collimated (parallel) light to the optical axis. Angle dependence will increase as half-width range of transmittance becomes narrow.
|Coating||Dielectric multi-layer coating|
|Maximum transmittance rate||T≧90%|
T≧80% (VPFHT-3250, -3550)
T≧85% (VPFHT-3638, -3720
|Clear aperture||φ8.5mm (φD=φ12.5mm)|
|Surface Quality (Scratch-Dig)||60-40|