Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: email@example.com
The stock availability for this product is limited at the moment. Please contact the sales team for more information at firstname.lastname@example.org.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at email@example.com. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : firstname.lastname@example.org
These optical windows have high-quality and may be used when light is passed through the opposite side of the partition or in the vacuum chamber. Since the windows have anti-reflection coatings the transmittance is increased so they can be used as a window for laser irradiation windows and the observation of the sample.
◦By anti-reflection coating with a dielectric multi-layer, it is reduced to less than 1% to 4% reflection loss of the glass surface.
◦Since we are using the high quality material, the image will not be distorted by the transmission of the glass, and the laser beam is not diffused.
◦When you insert an window perpendicular to the optical path of the laser, the angle of the transmitted beam will not be changed.
▶Anti-reflection coatings are also available at your specified wavelength.
▶In addition to the products described on our website and in the catalog other sizes and wedged windows are available.
▶Please refer to here for Wavelength Characteristic Data (Reference Data, EXCEL file format).
▶When using a laser which has a large diameter, there is a possibility that very little interference fringes will be observed in the luminance distribution of the transmitted light. To avoid this effect of the interference fringes, we provide wedged substrates.
▶When used at wavelengths other than the specified wavelength region, the loss of transmittance increases slightly.
▶When used in a large incident angle, there is a possibility that the transmittance decreases. Also available are anti-reflection coating to increase the transmittance at a particular angle of incidence.
|Coating||Dielectric multi-layer coating|
|Laser Damage Threshold||4J/cm2 (Laser pulse width ; 10ns , Repetition frequency ; 20Hz)|
|Laser Damage Threshold||4J/cm2|
|Surface Quality |
|Clear aperture||90% of the diameter|