Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: email@example.com
The stock availability for this product is limited at the moment. Please contact the sales team for more information at firstname.lastname@example.org.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at email@example.com. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : firstname.lastname@example.org
It is a prism for separating the incident beam into two linearly polarized beams with orthogonal polarizing direction.
◦Outgoing beam is emitted with deviation. In this case, the emitted beams are in opposite directions depending on the orientation of polarization.
◦A single-layer anti-reflection coating has been applied on the surface of the Wollaston prism to proved higher transmittance.
▶Glan Thompson prism with wider acceptance angle (GTPB / GTPC) and Glan laser prism for high-power laser (GLPB / GLP) are also available.
▶If you need uncoated Glan Laser prism or anti-reflection coating with specific reflectance, please contact our Sales Division with your request.
▶Please refer to here for Wavelength Characteristic Data (Reference Data, EXCEL file format).
▶A change in the incident angle may also change the extinction ratio of the linearly polarized transmitted light.
▶Separation angle will vary depending on the wavelength. Please confirm the wavelength characteristic graph for separation angle.
▶Because of natural calcite crystals, there are individual differences, and variations in quality.
|Material||α-BBO , Calcite|
|Transmitted wavefront distortion||λ/4|
|Coating||Both surfaces ; MgF2 single-layer antireflection coating|
|Laser Damage Threshold||0.3J/cm2 (Laser pulse width ; 10ns )|
|Surface Quality (Scratch-Dig)||20-10|
|Material propreties||Aluminum ( Finishing ; Black Anodized)|