Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: firstname.lastname@example.org
The stock availability for this product is limited at the moment. Please contact the sales team for more information at email@example.com.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at firstname.lastname@example.org. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : email@example.com
Wedged substrates can separate the reflected beam by the front and back surface of the substrates by the slight wedge angle. They can be used as a reference test plate for interferometers and beam samplers.
◦It can also be used as a prism to refract at a small angle. Beam deflection angle δ can be calculated refractive index n, from the wedge angle α.
δ ＝ sin−1（ n sinα） − α ≒（ n − 1） α
◦In BK7, 0.52 times the angle of the wedge, and in synthetic fused silica, 0.46 times the angle of the wedge. (Visible range, normal incidence)
▶An arrow mark on the thicker side of the edge indicates front surface of the substrate.
▶It is also available beam sampler (BS4) coated with anti-reflection coating on the back.
▶It is also available fabrication of the wedged substrates with a requested coating.
▶Wedged substrates are not coated on both sides. There is a 3.5 to 4% reflection of the surface of the glass.
▶If the wedged substrate is inserted in the optical path of the laser beam, the transmitted beam is inclined slightly causing the refraction.
|Material||Fused Silica for excimer laser (248nm)|
|Clear aperture||90% of the diameter|