Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: firstname.lastname@example.org
The stock availability for this product is limited at the moment. Please contact the sales team for more information at email@example.com.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at firstname.lastname@example.org. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : email@example.com
Higher moment of inertia to maximize stiffness and faster to reach thermal equilibrium characteristics are achieved by a hollow-frame design. Ideal for interference measurement or precision measurement.
Please check for an introduction video of the structure and features of MHX.
◦The mirror can be inserted from the back of the holder and fixed so that the reflecting surface of the mirror stops at the butt of the mirror frame with MHX-25.4F-R. This ensures that the reflecting surface of the mirror is always aligned with the mounting center of the rod, even if the thickness of the mirror changes. (For MHX-***F/A, the mirror is inserted from the front of the holder; for MHX-12.7F-R, the mirror is inserted from the back, but the rod cannot be attached.
◦MHX-***F/F-R has three adjustment axes screws that allow the reflecting surface to be moved back and forth in addition to the adjustment of tilt and rotation. (MHX-***A has only 2 axes of adjustment screws, so it can only be used for adjustment of tilt and rotation.
◦Adhesive holes for mirror adhesion and pin holes for anti-rotation and positioning are equiped.
◦High-density stainless steel is used for the material, but the weight has been reduced by reducing the thickness.
◦The frame design provides a higher moment of inertia to maximize stiffness and reduced-mass sections allowing it to reach thermal equilibrium faster for maximum stability.
▶Regarding how to fix the knob and the lock plate of MHX, please check from here.
▶Please use a hexagonal wrench to adjust the tilt and rotation. Do not use bare hands to turn the tilt or rotation screws. Hexagonal wrench with knob for MHX-12.7 (KCL-1513) is also available. W4144
We also offer a screw-in knob (MHX-K-M6) specifically for MHX-25.4 instead of a hexagonal wrench. ▶ A special lock (MHX-L-M*) is also available to hold the adjusted angle.
▶MHX-25.4 cannot be attached to M6 rods (RO). Use M4 or 8-32 UNC rods (ROC, RO-UU) when using a rod. MHX-12.7 is not compatible with tip threads rods. Both MHXs can be secured to post stands or various plate with M4 or 8-32 UNC threads. (For MHX-12.7, use the supplied small head bolts.
▶ When using a rod, it is not possible to change the beam transmission direction of the mirror holder. Use a post stand (PST) to change the direction.
▶ When used with a cross beam (optical system such as a Michelson interferometer), the effective diameter of the beam becomes smaller.
|Primary material||Stainless steel|