Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: email@example.com
The stock availability for this product is limited at the moment. Please contact the sales team for more information at firstname.lastname@example.org.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at email@example.com. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : firstname.lastname@example.org
Laser line plate mirrors are plate beamsplitters that are optically coated with dielectric multi-layer on the front surface of optical parallels or wedged substrates. The rear surface is coated with multi-layer anti-reflection.
◦Half mirrors divide input beam into reflectance and transmittance ratio of 1:1. A beamsplitter of R:T=1:1 is called “Half Mirror”.
◦Any loss from the input beams of this product is minimized because dielectric coatings have no absorption properties. However, the input ratio of reflection to transmission depends on wavelength, polarization and angle of incident of input beam.
◦Plate beamsplitters have beam deviations on transmission and ghost on rear surface reflections. Wedged substrates are used to prevent ghosting.
▶Please contact our Sales Division for customized products. (Customized on size, wavelength or R:T, etc.)
▶We also have ultra-wideband, broadband and cube types.
▶For a guarantee in reflected wavefront error or transmitted wavefront error, please contact our Sales Division with your requests.
▶Wedged types are marked with an arrow on the side of the substrate indicating the thickest point of the wedge.
▶Please refer to here for Wavelength Characteristic Data (Reference Data, EXCEL file format).
▶Should these products not function as a half mirror, please check the polarization characteristics of the light source. Do note that LD laser is linear in polarization.
▶The beam deviation at transmission of a wedged beamsplitter is large compared to a one made of optical parallel.
▶The amount of beam deviation of a beamsplitter depends on the thickness of the substrate and the wavelength or the incident angle of the input beam.
▶Transmission curves are based on actual measurements and may vary with manufacturing lots.
▶Surface flatness is the reflected wavefront distortion of the surface prior to coating.
▶Be sure to wear laser safety goggles when checking optical path and adjusting optical axis.
|Material||BK7 , Synthetic fused silica , CaF2|
|Surface flatness||λ/10( PSMH-157 is Polished)|
|Coating||Front surface ; Dielectric multilayer coating |
Rear surfaces ; Multilayer antireflection coating
|Divergence ratio |
(reflectance : transmittance)
|1 : 1|
|Surface Quality |
|10-5 (PSMH-157 ; 40-20)|
|Clear aperture||90% of the diameter|